Updated November 22, 2026 · About 11 minutes · the FieldToolHQ team
Most washing quotes start with area times a rate. That is fine when the surface is ordinary and you already know your pace. It is how people underbid a stained driveway and a two-story house in the same afternoon. Run a second price from hours, and charge the higher one.
The driveway range that is actually on the page
Angi’s driveway guide, updated October 16, 2026, says hiring someone to wash a driveway typically costs $0.30 to $0.55 per square foot, and that some pros charge $60 to $125 an hour instead. For 576 square feet, which it calls the most common driveway size, it lists $175 to $320. A 200 square foot driveway is listed at $60–$110. A 1,200 square foot driveway is listed at $360–$660. Those project totals line up with the per-foot range. Use that range.
The same page also says the national average is “$210 per square foot” and that most homeowners spend “$100 to $350 per square foot.” Those two sentences do not match the table under them. We are not going to repeat them as advice. If you see them quoted elsewhere, open the table.
The $0.40 default in the calculator is the middle of $0.30 and $0.55. It is not a rate Angi recommends you charge. Concrete and asphalt are not given separate per-foot rates in that range. Their material table is in project dollars, and it moves less than people expect: the page’s concrete and asphalt project bands sit close together. Condition and size move the price more than the label on the pavement.
Square feet and hours, side by side
Market-style price = square feet × your rate, or your minimum if the area is small. Cost-plus price = labor, with a burden, plus travel and chemical, divided by one minus your margin. Quote the higher figure. A fast, clean driveway will follow the square-foot price. A black oil stain that takes an hour of dwell and a second pass will follow the clock.
There is no Bureau of Labor Statistics occupation called pressure washer. Do not borrow the landscaping median and pretend it is a washing wage. Put the wage you actually pay in the labor line. The calculator’s $22 default is marked as an assumption for that reason.
What not to flatten into one rate
- House siding. A house-wash article on Angi restates driveway rates in one place and does not give a clean siding rate we were willing to cite. Soft washing is lower pressure and more chemical. Price it from time until your own invoices say otherwise.
- Roofs. High pressure on shingles is how you buy a roof. If you wash roofs, say “low pressure” on the quote and price the chemical and the time.
- Wood decks. They are slower, and the damage from too much pressure shows up after you leave.
A minimum is the small-job price
Angi notes that a one-car driveway can trigger a minimum because of travel, and it does not name a national dollar minimum. Pick yours from the cost of loading up, driving, and the shortest job you will accept. Write it on the quote next to the square footage, so the customer can see which rule set the price.
Questions people actually ask
Sources
Linked so you can check the number yourself. Marketplace cost guides describe what homeowners report paying. They are not a price you must charge.
- Angi, cost to pressure wash a driveway (updated Oct 16, 2026) — $0.30–$0.55 per sq ft, project totals by size, and a conflicting per-foot sentence we do not use.
- Angi, how to hire a driveway power washer (updated May 21, 2026) — Repeats $0.30–$0.55 per sq ft and a $100–$500 project span.
- IRS standard mileage rates — Useful if you convert the drive into a dollar cost instead of a flat travel fee.